单项选择题
Which command will allow you to display the configured QoS group and the ingress buffer allocated to each QoS group？（）
A. show interface priority-flow-control
B. show interface queuing
C. show queuing interface
D. show policy-map system type queuing
E. show policy-map interface ethernet
相关考题
-
单项选择题
Nexus7000# config t Nexus700（config）# interface ethernet 2/11 Nexus700（config-if）# switchport mode private-vlan host Nexus700（config-if）# switchport private-vlan host-association 14 50 Nexus700（config-if）# exit Nexus700（config）# What will this command sequence achieve？（）
A. associate interface E2/11 to community VLANs 14 and 50
B. associate interface E2/11 to secondary VLANs 14 and 50
C. associate interface E2/11 to primary VLAN 50 and secondary VLAN 14
D. associate interface E2/11 to primary VLAN 14 and secondary VLAN 50 -
多项选择题
EachportthatisconfiguredtouseLACPhasanLACPportpriority.WhichstatementsaretrueaboutLACPportpriority？（）
A. Port priority value can be configured between 1 and 65535.
B. A higher port priority value means a higher priority of LACP.
C. Port priority can be configured so that specific links can be chosen as active links rather than the hot standby links within the port channel.
D. LACP uses the port priority with the port number to form the port identifier.
E. LACP Port priority default value should always be changed -
单项选择题
WhichattributeisusedtopasstheuserrolebacktotheNexuswhenremoteAAAisenabled？（）
A. Cisco AV-pair
B. TACACS+ or RADIUS ack frame role attribute
C. DH-CHAP challenge attribute
D. privilege level attribute
