单项选择题
As a network technician， do you know what is a recommended practice for secure configurationmanagement？（）
A.Disable post scan
B.Use SSH or SSL
C.Enable trust levels
D.Deny echo replies on all edge routers
相关考题
-
单项选择题
Network Topology Exhibit： Configuration Exhibit： NET（config）# access-list 112 deny icmp any any echo log NET（config）# access-list 112 deny imp any any redirect log NET（config）# access-list 112 deny icmp any any mask-request log NET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255 NET（config）# interface Fa0/1 NET（config-if）# ip access-group 112 in You work as a network administrator at networkTut.com， study the exhibit carefully. The configuration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
A.The first three statements of ACL 112 should have permitted the ICMP traffic and the laststatement should deny the identified traffic
B.The last statement of ACL 112 should have been "access-list 112deny icmp any 10.2.1.00.0.0.255"
C.The last statement of ACL 112 should have been "access-list 112permit icmp any 10.2.1.00.0.0.255"
D.ACL 112 should have been applied to interface Fa0/0 in an inbound direction
E.The last statement of ACL 112 should have been "access-list 112deny icmp any 10.1.1.00.0.0.255"
F.ACL 112 should have been applied to interface Fa0/1 in an outbound direction
G.None of the above -
单项选择题
WhichstatementaboutPPPoAconfigurationiscorrect？（）
A.The dsl operating-mode auto command is required if the default mode has been changed
B.The ip mtu 1496 command must be applied on the dialer interface
C.The encapsulation ppp command is required
D.The ip mtu 1492 command must be applied on the dialer interface -
单项选择题
As a network engineer， study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem？（）
A.On the Dialer0 interface， add the pppoe enable command
B.On the Dialer0 Interface， add the ip mtu 1496 command
C.On the ATM0/0 interface， add the dialer pool-member 1 command
D.On the ATM0/0 interface， add the dialer pool-member 0 command
